Klein-tools VDV501-814 Manual do Utilizador descarregar pdf (Página 6)

ENGLISH

TESTING CONTINUITY - OVERVIEW

When testing for continuity of a cable, you are checking that all conductors within a cable are connected properly from one

end to the other.

Usually, faults occur when terminations on each side are not connected (an "open"), or when adjacent conductors are accidently

connected (a "short").

TESTING CONTINUITY - TERMINATED RJ45/RJ12 CABLE

Testing Continuity

Testing Continuity-Installed

Testing Continuity-Term Coax

Testing Continuity- Installed Coax

1 2 3

8-wire ethernet cables can have an additional set of errors. A miswire simply means that the pin on one side of the cable is not

connected to the identical pin on the other side of the cable (for example, pin 2 on one side is connected to pin 6 on the other side).

Certain pairs of conductors are required to be twisted together from endpoint to endpoint. These errors are called split pairs, and can

be present in cables that don't have any miswires.

Testing continuity is not the same as testing bandwidth. More sophisticated testers exist for verifying the amount of data that can pass

through a cable.

1. Connect one end of the cable under test

to the RJ45 port (if you are testing an ethernet cable) or RJ12 port

(if you are testing a phone cable) located at the top of the main tester body.

2. Detach self-storing remote

from the tester body. (ID remotes cannot be used.)

3. Connect the other end of the cable

to the corresponding port on the self-storing remote.

4. Press the data button

or the phone button

on the keypad to begin the test on the ethernet cable or

phone cable, respectively.

5. Interpret the results of the test

using the

Wiring and Display Examples

section.

Wiring and Display Examples section.Wiring and Display Examples

TESTING CONTINUITY - INSTALLED RJ45/RJ12 CABLE

Testing Continuity

Testing Continuity-Installed

Testing Continuity-Term Coax

Testing Continuity- Installed Coax

1 2 3

1. Detach self-storing remote

from the tester body.

2. Attach a known good patch cable

from the wall port at one end of the cable under test to the RJ45 port (for ethernet cable)

or RJ12 port (for phone cable) on the self-storing remote.

3. Attach another known good patch cable

from the wall port at the other end of the same cable under test to the corresponding

port located on the top of the main tester body.

4. Press the data button

or the phone button

on the keypad to begin the test on the ethernet cable or

phone cable, respectively.

5. Interpret the results of the test

using the

Wiring and Display Examples

section.

Wiring and Display Examples section.Wiring and Display Examples

TESTING CONTINUITY - TERMINATED COAX CABLE

Testing Continuity

Testing Continuity-Installed

Testing Continuity-Term Coax

Testing Continuity- Installed Coax

1 2 3

1. Attach barrel connector

to the open coax port on the top of the main tester body.

2. Connect one end of the cable

to the barrel connector at the top of the main tester body.

3. Attach a second barrel connector

(not included) to the other end of the cable under test.

4. Connect a numbered CoaxMap remote

onto the second barrel connector.

5. Press the video button

on the keypad to begin the test on the coax cable.

6. Interpret the results of the test

using the

Wiring and Display Examples

section.

Wiring and Display Examples section.Wiring and Display Examples

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comentários a estes Manuais

Sem comentários

Klein-tools VDV501-814 Manual do Utilizador Página 6

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Klein-tools VDV501-814