Klein-tools DTL302 Manual do Utilizador Página 6

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 36
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 5
6
ENGLISH
SET UP INSTRUCTIONS
A. Before Operating
Plug the thermocouple(s) into the input terminal(s).
Press “
” to turn the instrument on. After 1 second,
the thermometer displays the fi rst reading and its internal
temperature. If no thermocouple is plugged into the selected input
or the thermocouple is “
OPEN
”, the display shows “----”.
B. Set Up Mode
Use “
SETUP
” to reset the thermometer or change the date
settings, time units, time settings, thermocouple type, Auto-
Power-Off mode, logging interval, and offset.
When the thermometer is in “
SETUP
” mode, the display always
shows “
SETUP
”.
Press and Hold “
” for more than 1 second to start or exit
SETUP
” mode.
NOTE:
The meter must be in normal operation mode.
NOTE: The meter must be in normal operation mode. NOTE:
(Not logging or displaying Min/Max/Avg values)
Press “
EXIT
” or Press and Hold “
” for more than 1 second
to exit “
SETUP
”.
NOTE:
Press
NOTE: Press NOTE:
or
to scroll to the setup option you
want to change and then press
ENTER
to accept the selected
setup option.
C. Date
Entering Setup will show the first option of “
Press “
ENTER
” and the display will show “
Press “
” or “
” to select the correct year. Press “
ENTER
Next the meter will indicate month and day with “
”.
Press “
” or “
” to select the correct day. Press “
ENTER
Press “
” or “
” to select the correct month. Press “
ENTER
NOTE:
date and time must be set during the same session.
NOTE: date and time must be set during the same session.NOTE:
NOTE:
Both the date and time must be set in order to use the
NOTE: Both the date and time must be set in order to use the NOTE:
logging feature.
D. Time Unit
While in “
SETUP
” mode, scroll until the display shows “
“ in the primary display and “
“ in the secondary display.
Press “
ENTER
” to indicate you want to set the time units. The
display shows “
h:m
” blinking.
Press “
” or “
” to select the time units you want to
display, and press “
ENTER
” to store the time units in memory.
E. Time
Press “
” or “
” until the display shows “
”.
Press “
ENTER
” to indicate you want to set the time. The
display shows “
” blinking.
Press “
” or “
” until the display shows the correct hour
(24-hour format), and the press “
ENTER
” to store the time in
memory.
NOTE:
Holding down “
NOTE: Holding down “ NOTE:
” or “
” causes the number to
change more quickly.
F. Thermocouple Type
Press “
” or “
” until the display shows “
TYPE
”.
Press “
ENTER
” to display the thermocouple type choices (K, J,
E or T). The selected thermocouple type blinks.
Press “
” or “
” to scroll to the desired type appears on the
display, and press “
ENTER
” to store the thermocouple type in
memory.
G. Changing Auto-Power Off Time
The thermometer enters Auto-Power-Off mode if no button is
pressed for 30 minutes. Press “
to turn the thermometer
on. You can enable or disable Auto-Power-Off mode and also
you can select the Auto-Power-Off mode and also you can
select the Auto-Power-Off time (in minutes) among the 9
choices below:
1.
00:10
h:m
2.
00:20
h:m
3.
00:30
h:m
4.
00:40
h:m
5.
00:50
h:m
6.
00:60
h:m
7.
00:70
h:m
8.
00:80
h:m
9.
00:90
h:m
Default >
Vista de página 5
1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Comentários a estes Manuais

Sem comentários